Oracle Data Integrator 11G and 12C Online Training
Saturday, 27 April 2013
Friday, 26 April 2013
PLSQL CURSORS
CURSORS
Cursor is a pointer to memory location which is called as context area which contains the information necessary for processing, including the number of rows processed by the statement, a pointer to the parsed representation of the statement, and the active set which is the set of rows returned by the query.
Cursor contains two parts
ü Header
ü Body
Header includes cursor name, any parameters and the type of data being loaded.
Body includes the select statement.
Ex:
Cursor c(dno in number) return dept%rowtype is select *from dept;
In the above
Header – cursor c(dno in number) return dept%rowtype
Body – select *from dept
CURSOR TYPES
Ø Implicit (SQL)
Ø Explicit
ü Parameterized cursors
ü REF cursors
CURSOR STAGES
Ø Open
Ø Fetch
Ø Close
CURSOR ATTRIBUTES
Ø %found
Ø %notfound
Ø %rowcount
Ø %isopen
Ø %bulk_rowcount
Ø %bulk_exceptions
CURSOR DECLERATION
Syntax:
Cursor <cursor_name> is select statement;
Ex:
Cursor c is select *from dept;
CURSOR LOOPS
Ø Simple loop
Ø While loop
Ø For loop
SIMPLE LOOP
Syntax:
Loop
Fetch <cursor_name> into <record_variable>;
Exit when <cursor_name> % notfound;
<statements>;
End loop;
Ex:
cursor c is select * from student;
v_stud student%rowtype;
BEGIN
open c;
loop
fetch c into v_stud;
exit when c%notfound;
dbms_output.put_line('Name = ' || v_stud.name);
end loop;
close c;
END;
Output:
Name = saketh
Name = srinu
Name = satish
Name = sudha
WHILE LOOP
Syntax:
While <cursor_name> % found loop
Fetch <cursor_name> into <record_variable>;
<statements>;
End loop;
Ex:
DECLARE
cursor c is select * from student;
v_stud student%rowtype;
BEGIN
open c;
fetch c into v_stud;
while c%found loop
fetch c into v_stud;
dbms_output.put_line('Name = ' || v_stud.name);
end loop;
close c;
END;
Output:
Name = saketh
Name = srinu
Name = satish
Name = sudha
FOR LOOP
Syntax:
for <record_variable> in <cursor_name> loop
<statements>;
End loop;
Ex:
DECLARE
cursor c is select * from student;
BEGIN
for v_stud in c loop
dbms_output.put_line('Name = ' || v_stud.name);
end loop;
END;
Output:
Name = saketh
Name = srinu
Name = satish
Name = sudha
PARAMETARIZED CURSORS
Ø This was used when you are going to use the cursor in more than one place with different values for the same where clause.
Ø Cursor parameters must be in mode.
Ø Cursor parameters may have default values.
Ø The scope of cursor parameter is within the select statement.
Ex:
DECLARE
cursor c(dno in number) is select * from dept where deptno = dno;
v_dept dept%rowtype;
BEGIN
open c(20);
loop
fetch c into v_dept;
exit when c%notfound;
dbms_output.put_line('Dname = ' || v_dept.dname || ' Loc = ' || v_dept.loc);
end loop;
close c;
END;
Output:
Dname = RESEARCH Loc = DALLAS
PACKAGED CURSORS WITH HEADER IN SPEC AND BODY IN PACKAGE BODY
Ø cursors declared in packages will not close automatically.
Ø In packaged cursors you can modify the select statement without making any changes to the cursor header in the package specification.
Ø Packaged cursors with must be defined in the package body itself, and then use it as global for the package.
Ø You can not define the packaged cursor in any subprograms.
Ø Cursor declaration in package with out body needs the return clause.
Ex:
CREATE OR REPLACE PACKAGE PKG IS
cursor c return dept%rowtype is select * from dept;
procedure proc is
END PKG;
CREATE OR REPLACE PAKCAGE BODY PKG IS
cursor c return dept%rowtype is select * from dept;
PROCEDURE PROC IS
BEGIN
for v in c loop
dbms_output.put_line('Deptno = ' || v.deptno || ' Dname = ' || v.dname || '
Loc = ' || v.loc);
end loop;
END PROC;
END PKG;
Output:
SQL> exec pkg.proc
Deptno = 10 Dname = ACCOUNTING Loc = NEW YORK
Deptno = 20 Dname = RESEARCH Loc = DALLAS
Deptno = 30 Dname = SALES Loc = CHICAGO
Deptno = 40 Dname = OPERATIONS Loc = BOSTON
CREATE OR REPLACE PAKCAGE BODY PKG IS
cursor c return dept%rowtype is select * from dept where deptno > 20;
PROCEDURE PROC IS
BEGIN
for v in c loop
dbms_output.put_line('Deptno = ' || v.deptno || ' Dname = ' || v.dname || '
Loc = ' || v.loc);
end loop;
END PROC;
END PKG;
Output:
SQL> exec pkg.proc
Deptno = 30 Dname = SALES Loc = CHICAGO
Deptno = 40 Dname = OPERATIONS Loc = BOSTON
REF CURSORS AND CURSOR VARIABLES
Ø This is unconstrained cursor which will return different types depends upon the user input.
Ø Ref cursors can not be closed implicitly.
Ø Ref cursor with return type is called strong cursor.
Ø Ref cursor with out return type is called weak cursor.
Ø You can declare ref cursor type in package spec as well as body.
Ø You can declare ref cursor types in local subprograms or anonymous blocks.
Ø Cursor variables can be assigned from one to another.
Ø You can declare a cursor variable in one scope and assign another cursor variable with different scope, then you can use the cursor variable even though the assigned cursor variable goes out of scope.
Ø Cursor variables can be passed as a parameters to the subprograms.
Ø Cursor variables modes are in or out or in out.
Ø Cursor variables can not be declared in package spec and package body (excluding subprograms).
Ø You can not user remote procedure calls to pass cursor variables from one server to another.
Ø Cursor variables can not use for update clause.
Ø You can not assign nulls to cursor variables.
Ø You can not compare cursor variables for equality, inequality and nullity.
Ex:
CREATE OR REPLACE PROCEDURE REF_CURSOR(TABLE_NAME IN VARCHAR) IS
type t is ref cursor;
c t;
v_dept dept%rowtype;
type r is record(ename emp.ename%type,job emp.job%type,sal emp.sal%type);
v_emp r;
v_stud student.name%type;
BEGIN
if table_name = 'DEPT' then
open c for select * from dept;
elsif table_name = 'EMP' then
open c for select ename,job,sal from emp;
elsif table_name = 'STUDENT' then
open c for select name from student;
end if;
loop
if table_name = 'DEPT' then
fetch c into v_dept;
exit when c%notfound;
dbms_output.put_line('Deptno = ' || v_dept.deptno || ' Dname = ' ||
v_dept.dname || ' Loc = ' || v_dept.loc);
elsif table_name = 'EMP' then
fetch c into v_emp;
exit when c%notfound;
dbms_output.put_line('Ename = ' || v_emp.ename || ' Job = ' || v_emp.job || ' Sal
= ' || v_emp.sal);
elsif table_name = 'STUDENT' then
fetch c into v_stud;
exit when c%notfound;
dbms_output.put_line('Name = ' || v_stud);
end if;
end loop;
close c;
END;
Output:
SQL> exec ref_cursor('DEPT')
Deptno = 10 Dname = ACCOUNTING Loc = NEW YORK
Deptno = 20 Dname = RESEARCH Loc = DALLAS
Deptno = 30 Dname = SALES Loc = CHICAGO
Deptno = 40 Dname = OPERATIONS Loc = BOSTON
SQL> exec ref_cursor('EMP')
Ename = SMITH Job = CLERK Sal = 800
Ename = ALLEN Job = SALESMAN Sal = 1600
Ename = WARD Job = SALESMAN Sal = 1250
Ename = JONES Job = MANAGER Sal = 2975
Ename = MARTIN Job = SALESMAN Sal = 1250
Ename = BLAKE Job = MANAGER Sal = 2850
Ename = CLARK Job = MANAGER Sal = 2450
Ename = SCOTT Job = ANALYST Sal = 3000
Ename = KING Job = PRESIDENT Sal = 5000
Ename = TURNER Job = SALESMAN Sal = 1500
Ename = ADAMS Job = CLERK Sal = 1100
Ename = JAMES Job = CLERK Sal = 950
Ename = FORD Job = ANALYST Sal = 3000
Ename = MILLER Job = CLERK Sal = 1300
SQL> exec ref_cursor('STUDENT')
Name = saketh
Name = srinu
Name = satish
Name = sudha
CURSOR EXPRESSIONS
Ø You can use cursor expressions in explicit cursors.
Ø You can use cursor expressions in dynamic SQL.
Ø You can use cursor expressions in REF cursor declarations and variables.
Ø You can not use cursor expressions in implicit cursors.
Ø Oracle opens the nested cursor defined by a cursor expression implicitly as soon as it fetches the data containing the cursor expression from the parent or outer cursor.
Ø Nested cursor closes if you close explicitly.
Ø Nested cursor closes whenever the outer or parent cursor is executed again or closed or canceled.
Ø Nested cursor closes whenever an exception is raised while fetching data from a parent cursor.
Ø Cursor expressions can not be used when declaring a view.
Ø Cursor expressions can be used as an argument to table function.
Ø You can not perform bind and execute operations on cursor expressions when using the cursor expressions in dynamic SQL.
USING NESTED CURSORS OR CURSOR EXPRESSIONS
Ex:
DECLARE
cursor c is select ename,cursor(select dname from dept d where e.empno = d.deptno) from emp e;
type t is ref cursor;
c1 t;
c2 t;
v1 emp.ename%type;
v2 dept.dname%type;
BEGIN
open c;
loop
fetch c1 into v1;
exit when c1%notfound;
fetch c2 into v2;
exit when c2%notfound;
dbms_output.put_line('Ename = ' || v1 || ' Dname = ' || v2);
end loop;
end loop;
close c;
END;
CURSOR CLAUSES
Ø Return
Ø For update
Ø Where current of
Ø Bulk collect
RETURN
Cursor c return dept%rowtype is select *from dept;
Or
Cursor c1 is select *from dept;
Cursor c return c1%rowtype is select *from dept;
Or
Type t is record(deptno dept.deptno%type, dname dept.dname%type);
Cursor c return t is select deptno, dname from dept;
FOR UPDATE AND WHERE CURRENT OF
Normally, a select operation will not take any locks on the rows being accessed. This will allow other sessions connected to the database to change the data being selected. The result set is still consistent. At open time, when the active set is determined, oracle takes a snapshot of the table. Any changes that have been committed prior to this point are reflected in the active set. Any changes made after this point, even if they are committed, are not reflected unless the cursor is reopened, which will evaluate the active set again.
However, if the FOR UPDATE caluse is pesent, exclusive row locks are taken on the rows in the active set before the open returns. These locks prevent other sessions from changing the rows in the active set until the transaction is committed or rolled back. If another session already has locks on the rows in the active set, then SELECT … FOR UPDATE operation will wait for these locks to be released by the other session. There is no time-out for this waiting period. The SELECT…FOR UPDATE will hang until the other session releases the lock. To handle this situation, the NOWAIT clause is available.
Syntax:
Select …from … for update of column_name [wait n];
If the cursor is declared with the FOR UPDATE clause, the WHERE CURRENT OF clause can be used in an update or delete statement.
Syntax:
Where current of cursor;
Ex:
DECLARE
cursor c is select * from dept for update of dname;
BEGIN
for v in c loop
update dept set dname = 'aa' where current of c;
commit;
end loop;
END;
Subscribe to:
Posts (Atom)